[cisco-voip] Phone login profiles and different phone versions

[Ryan Ratliff]

The release notes for 7.1 should have a pretty big section dedicated to this.  Basically everything should work, but for depending on the device profile model and the phone model the phone may default to the default phone button template.

Reboots should only happen when the phone switches locale, iirc.

-Ryan

On May 4, 2010, at 4:13 PM, tman701 wrote:

> Beginning in cucm 7.x u only need one profile built. Not sure about the rebooting part. Havent looked for that nor have i had any complaints due to it. 
> 
> Joel P.
> 
> Sent from my HTC
> 
> From: Madziarczyk, Jonathan <JMad at cityofevanston.org>
> Sent: Tuesday, May 04, 2010 15:45
> To: cisco-voip at puck.nether.net
> Subject: [cisco-voip] Phone login profiles and different phone versions
> 
> What is the status of using a login profile on a different phone than what the profile was created for?
>  
> So far what we’ve seen is
>  
> 7941 profile – works on 7941 phone, reboots a 7945 phone then works
> 7965 profile – works on 7965 phone, also works on 7961
>  
> Can profiles work on different revision phones (796x phones) without rebooting the phone?
> Can profiles work across different line number phones (796x and 794x phones)
>  
> If not, how do we allow this type of flexibility for people not to have to take inventory of what phone they’re logging into to get their profile?
>  
> jon
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100504/b4f19441/attachment.html>