[cisco-voip] phone proxy setup?

[Chris Ward (chrward)]

Sounds like Mobile Voice Access which is included in UCM from 6.0 and
later. Check it out. It allows you to place calls from outside the
enterprise as if you were using your enterprise phone.

 

+Chris

 

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Tom Sparks
Sent: Thursday, May 06, 2010 2:47 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] phone proxy setup?

 

Hi, 

 I was wondering if anyone knew how to setup either CallManager,
gateway, etc such that I could make calls into it and have them 

 a) connect

 b) accept a new phone number (to the PSTN)

 c) route/connect to the call to the new number

 

basically a switchboard, calling card, proxy type deal.  One idea I had
was to use Unity and create a Directory Handler but the numbers that
would be called I don't know ahead of time.   I would probably put a FAC
on it to keep it from being abused, it's just needed temporarily. 

 

Any ideas?

Thanks

 

Tom Sparks

Taos Consulting

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100506/ec481241/attachment.html>