[cisco-voip] Intercom Announcement

[Haas, Neal]

I have this setup in Informacast, works really good.

Neal Haas

1020 S 10th St 
Fresno, CA  93702 
Desk 559.600.5890

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Mathew Miller
Sent: Friday, May 07, 2010 9:43 AM
To: Kevin Dunn
Cc: Cisco Voice
Subject: Re: [cisco-voip] Intercom Announcement

Singlewire Informacast would be a good option.


On May 7, 2010, at 11:39 AM, Kevin Dunn wrote:

> Okay party animals
>  
> We want our office users to get a "warble and recorded message" when someone dials a trigger number (222)
> Then is we have a security alarm/envir. alarm go off we can have the monitor dial 222 and the end users hear
>  
> WOOP WOOP you are on fire STOP DROP AND ROLL   WOOP WOOP
>  
> what would be the best way to use that?
>  
>  
> Kevin
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip


_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip