[cisco-voip] Intercom Announcement

lelio at uoguelph.ca lelio at uoguelph.ca
Mon May 10 08:16:57 EDT 2010


If you have some good programmers on staff, take a look at CUAE.

…
Don't look at me, my iPod made that spilling mistake.

On 2010-05-10, at 7:48 AM, Kevin Dunn <cheesevoice at gmail.com> wrote:

> let's call that "option B"  LOL
> seriously though we have ample ATA's and FX ports ... that is not a  
> problem.
>
> Thanks
>
> Kevin
>
> On Fri, May 7, 2010 at 10:52 PM, James Buchanan  
> <jbuchanan at ctiusa.com> wrote:
> Hook an ATA up to an electrode. When you dial 222, it should send  
> the appropriate voltage to get someone to jump and start yelling “WO 
> OP WOOP you are on fire STOP DROP and ROLL WOOP WOOP”. It’s not  
> very scalable and is kind of expensive, but it would work.
>
>
>
> On a more serious note, many buildings have an annunciator that  
> hooks up to overhead paging. This can be easily integrated with  
> using an ATA, FXS, or FXO port depending on the adapter available.  
> Is this an option?
>
>
>
> Thanks,
>
>
>
> James Buchanan | Senior Network Engineer | Mid-Atlantic | Presidio  
> Networked Solutions
> 12 Cadillac Dr, Suite 130, Brentwood, TN 37027 |  
> jbuchanan at presidio.com
> D: 615-866-5729 | www.presidio.com <http://www.presidio.com>
>
> CCIE #25863, Voice
>
>
>
>
> From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip- 
> bounces at puck.nether.net] On Behalf Of Kevin Dunn
> Sent: Friday, May 07, 2010 11:45
> To: Mathew Miller
>
>
> Cc: Cisco Voice
> Subject: Re: [cisco-voip] Intercom Announcement
>
>
> I like informacast, but was hoping for a solution withint CUCM/Unity
>
> On Fri, May 7, 2010 at 11:43 AM, Mathew Miller <miller.mathew at gmail.com 
> > wrote:
>
> Singlewire Informacast would be a good option.
>
>
>
> On May 7, 2010, at 11:39 AM, Kevin Dunn wrote:
>
> > Okay party animals
> >
> > We want our office users to get a "warble and recorded message"  
> when someone dials a trigger number (222)
> > Then is we have a security alarm/envir. alarm go off we can have  
> the monitor dial 222 and the end users hear
> >
> > WOOP WOOP you are on fire STOP DROP AND ROLL   WOOP WOOP
> >
> > what would be the best way to use that?
> >
> >
> > Kevin
>
> > _______________________________________________
> > cisco-voip mailing list
> > cisco-voip at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100510/473eda11/attachment.html>


More information about the cisco-voip mailing list