[cisco-voip] Trace call over SIP trunk from CCM

[Marty van de Veerdonk]

when I dail the number that is behind the SIP trunk, I get a busy signal. 

On the pico cell side I don't get any signalling events, so it seems that the call doesn't leave the CCM. 

Anyone ideas? 

----- Oorspronkelijk bericht ----- 
Van: "Ryan Ratliff" <rratliff at cisco.com> 
Aan: "Marty van de Veerdonk" <marty at voiceidentity.nl> 
Cc: "cisco-voip" <cisco-voip at puck.nether.net> 
Verzonden: Vrijdag 7 mei 2010 15:39:08 
Onderwerp: Re: [cisco-voip] Trace call over SIP trunk from CCM 

CCM traces or a packet capture will clearly show you the sip signaling. 



-Ryan 


On May 7, 2010, at 6:59 AM, Marty van de Veerdonk wrote: 




I have a CCM with a SIP trunk to the pico cell gateway. Between a cell phone and internal DN we want to dail via 5 digits. 
The call from the cell phone towards the fixed phone is working, the call from the deskphone towards the cell phone isn't. 

In the DNA tool of CCM I see that the right SIP trunk is selected (via route pattern, route list, route group), but still the call is handled correctly.   
I don't have access to the pico cell gateway. 

How can I validate that the call is sent over the SIP trunk with the proper format? 

regards, Marty 

_______________________________________________ 
cisco-voip mailing list 
cisco-voip at puck.nether.net 
https://puck.nether.net/mailman/listinfo/cisco-voip 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100511/99a1ca15/attachment.html>