[cisco-voip] Trace call over SIP trunk from CCM

[Ryan Ratliff]

CCM traces or a packet capture will clearly show you the sip signaling (if there is any).

-Ryan

On May 11, 2010, at 9:28 AM, Marty van de Veerdonk wrote:

> when I dail the number that is behind the SIP trunk, I get a busy signal.
> On the pico cell side I don't get any signalling events, so it seems that the call doesn't leave the CCM.
> 
> Anyone ideas?
> 
> ----- Oorspronkelijk bericht -----
> Van: "Ryan Ratliff" <rratliff at cisco.com>
> Aan: "Marty van de Veerdonk" <marty at voiceidentity.nl>
> Cc: "cisco-voip" <cisco-voip at puck.nether.net>
> Verzonden: Vrijdag 7 mei 2010 15:39:08
> Onderwerp: Re: [cisco-voip] Trace call over SIP trunk from CCM
> 
> CCM traces or a packet capture will clearly show you the sip signaling.
> 
> -Ryan
> 
> On May 7, 2010, at 6:59 AM, Marty van de Veerdonk wrote:
> 
> I have a CCM with a SIP trunk to the pico cell gateway. Between a cell phone and internal DN we want to dail via 5 digits.
> The call from the cell phone towards the fixed phone is working, the call from the deskphone towards the cell phone isn't.
> 
> In the DNA tool of CCM I see that the right SIP trunk is selected (via route pattern, route list, route group), but still the call is handled correctly. 
> I don't have access to the pico cell gateway.
> 
> How can I validate that the call is sent over the SIP trunk with the proper format?
> 
> regards, Marty
> 
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
> 
> 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100511/f1d566fd/attachment.html>