[cisco-voip] Upgrade Assistant question
Ed Leatherman
ealeatherman at gmail.com
Thu May 13 16:35:53 EDT 2010
DMA actually installed OK, I installed it first and then when I ran it
it reminded me to run the upgrade utility.
On Thu, May 13, 2010 at 4:34 PM, Ryan Ratliff <rratliff at cisco.com> wrote:
> Not critical that I'm aware of, unless there are dependancies for the DMA tool tied to OS version.
>
> -Ryan
>
> On May 13, 2010, at 4:30 PM, Ed Leatherman wrote:
>
>> Hello,
>>
>> I am starting process to upgrade our CM 4.2 system at a regional
>> campus to 7 (huzzah!). When running the upgrade assistant utility to
>> check the system health, it is returning an error:
>>
>> ERR:OS upgrade has incorrect version (expected "200X.X.X", but found "200X.X.X")
>>
>> Is the actual OS upgrade version relevant in this case for DMA to work
>> properly? Do I really need to upgrade to the specified OS Upgrade
>> version for this, or is it checking against rules to upgrade to CM 4.3
>> instead for some reason? Everything else checks out OK.
>>
>> Thanks in advance!
>>
>> --
>> Ed Leatherman
>> _______________________________________________
>> cisco-voip mailing list
>> cisco-voip at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
--
Ed Leatherman
More information about the cisco-voip
mailing list