[cisco-voip] Upgrade Assistant question

[Ed Leatherman]

I was going to generate a DMA file over the weekend so I can run thru
the install process in the lab. Will see what happens.

On Thu, May 13, 2010 at 5:34 PM, Wes Sisk <wsisk at cisco.com> wrote:
> I'm with Ryan, I've only seen a few instances where DMA failed on OS
> dependencies. If DMA is working I'm not aware of valid reasons to upgrade
> the OS just to wipe the server.
>
> /Wes
>
> On Thursday, May 13, 2010 4:36:56 PM, Jason Aarons (US)
> <jason.aarons at us.didata.com> wrote:
>>
>> Yes you really need to have the correct OS image.
>>
>> -----Original Message-----
>> From: cisco-voip-bounces at puck.nether.net
>> [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Ed Leatherman
>> Sent: Thursday, May 13, 2010 4:30 PM
>> To: Cisco VOIP
>> Subject: [cisco-voip] Upgrade Assistant question
>>
>> Hello,
>>
>> I am starting process to upgrade our CM 4.2 system at a regional
>> campus to 7 (huzzah!). When running the upgrade assistant utility to
>> check the system health, it is returning an error:
>>
>> ERR:OS upgrade has incorrect version (expected "200X.X.X", but found
>> "200X.X.X")
>>
>> Is the actual OS upgrade version relevant in this case for DMA to work
>> properly? Do I really need to upgrade to the specified OS Upgrade
>> version for this, or is it checking against rules to upgrade to CM 4.3
>> instead for some reason? Everything else checks out OK.
>>
>> Thanks in advance!
>>
>>
>
>



-- 
Ed Leatherman