[cisco-voip] CUPC click to callback

[James Buchanan]

Go under Call Routing. Configure Application Dial Rules. These should be configured to take whatever you are sending and to change it to match your dial plan. Then, go into SystemàService ParametersàWebDialer. Check the checkbox to use Application Dial Rules on SOAP Requests. Restart the WebDialer service. 

 

Thanks,

 

James Buchanan | Senior Network Engineer | South Region | Presidio Networked Solutions 
12 Cadillac Dr, Suite 130, Brentwood, TN 37027 | jbuchanan at presidio.com
D: 615-866-5729 | www.presidio.com <http://www.presidio.com> 

CCIE #25863, Voice



 

From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Mac GroupStudy
Sent: Monday, May 17, 2010 5:24 PM
To: Mike Lydick
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] CUPC click to callback

 

I do not have a phone in front of me but isn't there an "Edit" softkey (maybe "Edit Dial") when you are looking at missed calls?

 

On Mon, May 17, 2010 at 5:16 PM, Mike Lydick <mike.lydick at gmail.com> wrote:

For missed calls and calling based on VM CLID, how does one edit the call to add a 9?

 


Best Regards,

Mike Lydick




_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100517/f8ca93ff/attachment.html>