[cisco-voip] Incorrect behavior Cisco Dialed Number Analyzer

[Marty van de Veerdonk]

Hello, 
we are using Cisco DNA to verify if users are able to call certain external numbers. 
The result is that the correct patterns, route list, route groups, MGCP gateways and PRI are selected. 



    • Device : Type = MGCPE1PRIPort 


        • End Device Name = S0/SU3/DS1-0 at ewaw1-01dc-rtw-01.noc.medtronic.com 

However when we place a testcall the CallManager replies with "Sorry, but we are not able......" before the entire number is dailed. 
This looks like a CCS/partition issue, but the DNA says that the call flow is correct . 

What can be the problem? 

regards, Marty 






-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100519/c84e4e25/attachment.html>