[cisco-voip] Incorrect behavior Cisco Dialed Number Analyzer

[Cheng, Karen]

Do you have multiple Route Patterns that can be matched with the Urgent Priority ticked?? Or Translation Patterns?

If you have urgent priority selected and you have multiple patterns that could be matched, the first match (not the most specific) will be chosen…..




Karen Cheng
Voice Network Engineer


From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Marty van de Veerdonk
Sent: Wednesday, 19 May 2010 4:49 PM
To: cisco-voip
Subject: [cisco-voip] Incorrect behavior Cisco Dialed Number Analyzer

Hello,
we are using Cisco DNA to verify if users are able to call certain external numbers.
The result is that the correct patterns, route list, route groups, MGCP gateways and PRI are selected.



 *   Device :Type= MGCPE1PRIPort

    *   End Device Name = S0/SU3/DS1-0 at ewaw1-01dc-rtw-01.noc.medtronic.com
However when we place a testcall the CallManager replies with "Sorry, but we are not able......" before the entire number is dailed.
This looks like a CCS/partition issue, but the DNA says that the call flow is correct.

What can be the problem?

regards, Marty




Plan ahead these school holidays with RACQ's online trip planner - and don't forget to pack Ultra Care for additional travel benefits following a breakdown. Some conditions apply. Visit http://www.racq.com.au for details.

Please Note: If you are not the intended recipient, please delete this email as its use is prohibited. RACQ does not warrant or represent that this email is free from viruses or defects. If you do not wish to receive any further commercial electronic messages from RACQ please e-mail unsubscribe at racq.com.au or contact RACQ on 13 19 05.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100519/be71d95f/attachment.html>