[cisco-voip] Incorrect behavior Cisco Dialed Number Analyzer

[Marty van de Veerdonk]

No, even when I create a specific route pattern that exactly is matching the dail string I get the same error. 



----- Oorspronkelijk bericht ----- 
Van: "Karen Cheng" <Karen.Cheng at racq.com.au> 
Aan: "Marty van de Veerdonk" <marty at voiceidentity.nl>, "cisco-voip" <cisco-voip at puck.nether.net> 
Verzonden: Woensdag 19 mei 2010 08:52:10 
Onderwerp: RE: [cisco-voip] Incorrect behavior Cisco Dialed Number Analyzer 




Do you have multiple Route Patterns that can be matched with the Urgent Priority ticked?? Or Translation Patterns? 



If you have urgent priority selected and you have multiple patterns that could be matched, the first match (not the most specific) will be chosen….. 











Karen Cheng 


Voice Network Engineer 








From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Marty van de Veerdonk 
Sent: Wednesday, 19 May 2010 4:49 PM 
To: cisco-voip 
Subject: [cisco-voip] Incorrect behavior Cisco Dialed Number Analyzer 




Hello, 
we are using Cisco DNA to verify if users are able to call certain external numbers. 
The result is that the correct patterns, route list, route groups, MGCP gateways and PRI are selected. 




    • Device : Type = MGCPE1PRIPort 




        • End Device Name = S0/SU3/DS1-0 at ewaw1-01dc-rtw-01.noc.medtronic.com 


However when we place a testcall the CallManager replies with "Sorry, but we are not able......" before the entire number is dailed. 
This looks like a CCS/partition issue, but the DNA says that the call flow is correct. 

What can be the problem? 

regards, Marty 









Plan ahead these school holidays with RACQ's online trip planner - and don't forget to pack Ultra Care for additional travel benefits following a breakdown. Some conditions apply. Visit http://www.racq.com.au for details. 

Please Note: If you are not the intended recipient, please delete this email as its use is prohibited. RACQ does not warrant or represent that this email is free from viruses or defects. If you do not wish to receive any further commercial electronic messages from RACQ please e-mail unsubscribe at racq.com.au or contact RACQ on 13 19 05. 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100519/4cd2e74d/attachment.html>