[cisco-voip] MGCP Inbound Calls Question

[Mac GroupStudy]

Verify that the gateway has its significant digits set to all (or 5). It
will be located under the "Incoming/Inbound Call" parameters or settings (I
forget the actual name) but it will be obvious. This I believe is at the
MGCP endpoint level and not the gateway.

On Wed, May 19, 2010 at 5:36 AM, James Dust <
james.dust at charles-stanley.co.uk> wrote:

>  Hi,
>
> I have an MGCP gateway (2811), configured as a QSIG E1 connection into a
> Cisco VG30D, the VG30D in turn plugs into a DPNSS circuit. The DPNSS
> circuit is a connection into the London Stock Exchange network (STX).
>
> I am able to make outbound calls over this connection no problem (sending
> five digits onto their network), the thing is that inbound I am only
> seeing one digit (debug one the router) and the provider are saying they
> are sending five which I need.
>
> What am I missing? And what can I check?
>
> Regards
>
> James
>
> *Consider the environment - Think before you print*
>
> The contents of this email are confidential to the intended recipient and
> may not be disclosed. Although it is believed that this email and
> any attachments are virus free, it is the responsibility of the recipient to
> confirm this.
>
> You are advised that urgent, time-sensitive communications should not be
> sent by email. We hereby give you notice that a delivery receipt does not
> constitute acknowledgement or receipt by the intended recipient(s).
>
> Details of Charles Stanley group companies and their regulators (where
> applicable), can be found at this URL
> http://www.charles-stanley.co.uk/contact-us/disclosure/
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100519/d8c89eba/attachment.html>