[cisco-voip] MGCP Inbound Calls Question

James Dust james.dust at charles-stanley.co.uk
Wed May 19 05:36:38 EDT 2010


Hi,

I have an MGCP gateway (2811), configured as a QSIG E1 connection into a
Cisco VG30D, the VG30D in turn plugs into a DPNSS circuit. The DPNSS
circuit is a connection into the London Stock Exchange network (STX).

I am able to make outbound calls over this connection no problem
(sending five digits onto their network), the thing is that inbound I am
only seeing one digit (debug one the router) and the provider are saying
they are sending five which I need.

What am I missing? And what can I check?

Regards

James

Consider the environment - Think before you print

The contents of this email are confidential to the intended recipient and may not be disclosed. Although it is believed that this email and any attachments are virus free, it is the responsibility of the recipient to confirm this. 

You are advised that urgent, time-sensitive communications should not be sent by email. We hereby give you notice that a delivery receipt does not constitute acknowledgement or receipt by the intended recipient(s).

Details of Charles Stanley group companies and their regulators (where applicable), can be found at this URL http://www.charles-stanley.co.uk/contact-us/disclosure/

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100519/2a623553/attachment.html>


More information about the cisco-voip mailing list