[cisco-voip] Incorrect behavior Cisco Dialed Number Analyzer

[Mac GroupStudy]

In DNA after the path is shown toward the bottom there is an "Alternate
Match" section. Are there any other potential matches occurring? As you
surmise it sounds like either a CSS/PT issue or you are matching a shorter
route pattern.


On Wed, May 19, 2010 at 7:13 AM, Marty van de Veerdonk <
marty at voiceidentity.nl> wrote:

> MGCP
>
> we don't use route filters on RP
>
> ----- Oorspronkelijk bericht -----
> Van: "Dennis Heim" <Dennis.Heim at cdw.com>
> Aan: "Marty van de Veerdonk" <marty at voiceidentity.nl>
> Cc: "cisco-voip" <cisco-voip at puck.nether.net>, "Karen Cheng" <
> Karen.Cheng at racq.com.au>
> Verzonden: Woensdag 19 mei 2010 13:10:36
>
> Onderwerp: RE: [cisco-voip] Incorrect behavior Cisco Dialed Number Analyzer
>
> If it is the dialing forest issue, then that is what I would expect to see.
> It has to do with router filters applied on Route Patterns. Inbound will
> continue to work, outbound won’t and you will want to pull your hair out
> because it makes no sense. What protocol is your gateway running (MGCP OR
> H.323)?
>
>
>
> Dennis Heim
> Network Voice Engineer
> CDW  Advanced Technology Services
> 11711 N. Meridian Street, Suite 225
> Carmel, IN  46032
>
> 317.569.4255 Office
> 317.569.4201 Fax
> 317.694.6070 Cell
>
> dennis.heim at cdw.com
> cdw.com/content/solutions/unified-communications/<http://www.cdw.com/content/solutions/unified-communications/>
>
>
>
>
>
> *From:* Marty van de Veerdonk [mailto:marty at voiceidentity.nl]
> *Sent:* Wednesday, May 19, 2010 6:56 AM
> *To:* Dennis Heim
> *Cc:* cisco-voip; Karen Cheng
> *Subject:* Re: [cisco-voip] Incorrect behavior Cisco Dialed Number
> Analyzer
>
>
>
> we see incoming calls in the q931 trace, but no outgoing call.
>
> running CCM6.1.3
>
>
> ----- Oorspronkelijk bericht -----
> Van: "Dennis Heim" <Dennis.Heim at cdw.com>
> Aan: "Marty van de Veerdonk" <marty at voiceidentity.nl>, "Karen Cheng" <
> Karen.Cheng at racq.com.au>
> Cc: "cisco-voip" <cisco-voip at puck.nether.net>
> Verzonden: Woensdag 19 mei 2010 12:39:34
> Onderwerp: RE: [cisco-voip] Incorrect behavior Cisco Dialed Number Analyzer
>
>
> Turn on q.931 ISDN  trace, and see if it is even extending it to the
> gateway. What ver of ccm are you running? I have seen it with some ver’s
> where the dialing forrest gets jacked up and requires a cluster reboot.
>
>
>
> Dennis Heim
> Network Voice Engineer
> CDW  Advanced Technology Services
> 11711 N. Meridian Street, Suite 225
> Carmel, IN  46032
>
> 317.569.4255 Office
> 317.569.4201 Fax
> 317.694.6070 Cell
>
> dennis.heim at cdw.com
> cdw.com/content/solutions/unified-communications/<http://www.cdw.com/content/solutions/unified-communications/>
>
>
>
>
>
> *From:* cisco-voip-bounces at puck.nether.net [mailto:
> cisco-voip-bounces at puck.nether.net] *On Behalf Of *Marty van de Veerdonk
> *Sent:* Wednesday, May 19, 2010 3:53 AM
> *To:* Karen Cheng
> *Cc:* cisco-voip
> *Subject:* Re: [cisco-voip] Incorrect behavior Cisco Dialed Number
> Analyzer
>
>
>
> No, even when I create a specific route pattern that exactly is matching
> the dail string I get the same error.
>
>
>
> ----- Oorspronkelijk bericht -----
> Van: "Karen Cheng" <Karen.Cheng at racq.com.au>
> Aan: "Marty van de Veerdonk" <marty at voiceidentity.nl>, "cisco-voip" <
> cisco-voip at puck.nether.net>
> Verzonden: Woensdag 19 mei 2010 08:52:10
> Onderwerp: RE: [cisco-voip] Incorrect behavior Cisco Dialed Number Analyzer
>
> Do you have multiple Route Patterns that can be matched with the Urgent
> Priority ticked?? Or Translation Patterns?
>
>
>
> If you have urgent priority selected and you have multiple patterns that
> could be matched, the first match (not the most specific) will be chosen…..
>
>
>
>
>
>
>
>
>
> *Karen Cheng*
>
> *Voice Network Engineer*
>
>
>
>
>
> *From:* cisco-voip-bounces at puck.nether.net [mailto:
> cisco-voip-bounces at puck.nether.net] *On Behalf Of *Marty van de Veerdonk
> *Sent:* Wednesday, 19 May 2010 4:49 PM
> *To:* cisco-voip
> *Subject:* [cisco-voip] Incorrect behavior Cisco Dialed Number Analyzer
>
>
>
> Hello,
> we are using Cisco DNA to verify if users are able to call certain external
> numbers.
> The result is that the correct patterns, route list, route groups, MGCP
> gateways and PRI are selected.
>
>    - *Device* :*Type*= MGCPE1PRIPort
>
>
>    - *End Device Name* = S0/SU3/DS1-0 at ewaw1-01dc-rtw-01.noc.medtronic.com
>
> However when we place a testcall the CallManager replies with "Sorry, but
> we are not able......" before the entire number is dailed.
> This looks like a CCS/partition issue, but the DNA says that the call flow
> is correct.
>
> What can be the problem?
>
> regards, Marty
>
>
>
>
>
>
> Plan ahead these school holidays with RACQ's online trip planner - and
> don't forget to pack Ultra Care for additional travel benefits following a
> breakdown. Some conditions apply. Visit http://www.racq.com.au for
> details.
>
> Please Note: If you are not the intended recipient, please delete this
> email as its use is prohibited. RACQ does not warrant or represent that this
> email is free from viruses or defects. If you do not wish to receive any
> further commercial electronic messages from RACQ please e-mail
> unsubscribe at racq.com.au or contact RACQ on 13 19 05.
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100519/860de5ef/attachment.html>