[cisco-voip] Firmware Load Information page

[Ed Leatherman]

Gotcha, thanks Wes and Matthew

On Mon, May 24, 2010 at 10:57 AM, Wes Sisk <wsisk at cisco.com> wrote:
> That page queries the database for devices that have custom 'load
> information' configured on the device specific configuration page.  It is in
> no way integrated with the registration process where devices report their
> actual load it.
>
> The only ways to identify load information on devices are:
> 1. RTMT device query (screen shot previously provided on this list)
> 2. detailed CM SDI traces during registration
> 3. querying the endpoint directly
>
> /Wes
>
> On Monday, May 24, 2010 10:00:29 AM, Ed Leatherman <ealeatherman at gmail.com>
> wrote:
>>
>> Happy Monday,
>>
>> Does anyone know how the "Device Not Using Default Load" is determined
>> in the Firmware Load Information page on CUCM 6.1?
>>
>> I just loaded new firmware for 7961's a few weeks ago but haven't
>> reset many phones since then, so I expected a large number of them
>> would still be running the older version. According to this page
>> however, none of them are running anything other than the default
>> firmware. Just checking a few phones I identified several that are
>> running the old version still.
>>
>> Is there some operation or mechanic in CUCM that refreshes or updates
>> this page when a firmware default is changed? Or am I misunderstanding
>> what this page is supposed to be telling me?
>>
>>
>
>



-- 
Ed Leatherman