[cisco-voip] CUCM 7.0 and 2900 series

[H, Tim]

Hi Karen,

I had this issue too.  You have to upgrade to 7.13 unfortunately.  See middle of page 10.

http://www.cisco.com/en/US/prod/collateral/routers/ps259/product_data_sheet0900aecd8057f2e0.pdf

Tim

From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Cheng, Karen
Sent: Tuesday, May 25, 2010 2:07 AM
To: cisco-voip
Subject: [cisco-voip] CUCM 7.0 and 2900 series

Hey guys,

Just wondering if anyone knows how to get the 2900 series routers to show up under the Gateway list when adding in a new gateway in CUCM 7.0.2.

I can see the 28xx series but not the 29xx series. I am trying to add in an SCCP gateway.

Also if I can use another gateway type as a substitute instead that would be even better :P

Karen Cheng
Voice Network Engineer


Plan ahead these school holidays with RACQ's online trip planner - and don't forget to pack Ultra Care for additional travel benefits following a breakdown. Some conditions apply. Visit http://www.racq.com.au for details.

Please Note: If you are not the intended recipient, please delete this email as its use is prohibited. RACQ does not warrant or represent that this email is free from viruses or defects. If you do not wish to receive any further commercial electronic messages from RACQ please e-mail unsubscribe at racq.com.au or contact RACQ on 13 19 05.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100525/cbb94cac/attachment.html>