[cisco-voip] [cisco-voi] Mixed mode Unity 7 - Exchange 2010 and Exchange 2007

[Ted Nugent]

Well it does but its pretty vague... I'm reading out on the NetPro that
there are still bugs around Exchange 2010 in general. I have one of these I
have to do myself in about a month and hoping there might be some more ESs
out to resolve some on the issues. If I get some free time over the next
couple weeks I'm going to attempt to lab this out and I'll report back but
no promises if i can't make the time.

Installing a New Cisco Unity 7.0 Server Into a Mixed Exchange Environment
and Choosing a Partner Server Other Than Exchange 2010

Do the procedure in this section to install a new Cisco Unity 7.0 server
that uses a mixed Exchange environment—including Exchange 2010 servers—and
to configure Cisco Unity to use Exchange 2010 as a message store but without
using Exchange 2010 as the partner Exchange server.

To Install a New Cisco Unity 7.0 Server Into a Mixed Exchange Environment
and to Choose a Partner Server Other Than Exchange 2010
------------------------------

*Step 1 *Install the Cisco Unity server by following the applicable version
of the *Installation Guide for Cisco Unity Release 5.x in a Unified
Messaging Configuration with Microsoft Exchange* at
http://www.cisco.com/en/US/products/sw/voicesw/ps2237/prod_installation_guides_list.html
.
------------------------------

*Note *Content and instructions in the 5.x guides apply to installing
version 7.0 as well. See also the "New Functionality" and "Changed
Functionality" sections of *Release Notes for Cisco Unity Release 7.0(2)* at
http://www.cisco.com/en/US/docs/voice_ip_comm/unity/7x/release/notes/702curelnotes.html
.
------------------------------

*Step 2 *Update Cisco Unity to function correctly with Exchange 2010. See
the "Adding One or More Exchange 2010 Servers to an Existing Cisco Unity 7.0
Installation" section<http://www.cisco.com/en/US/docs/voice_ip_comm/unity/7x/using_exch2010/usingex2010withcu7x5x.html#wp46611>
.



On Tue, May 25, 2010 at 4:39 PM, <Johnny.Crothers at datacraft.co.nz> wrote:

>  Thanks for that Ted, however thats the same document i saw, from the
> looks of things it will support multiple instances of Exchange 2010 but it
> doesn’t mention a mixed environment? Unless I’ve misread something in there?
>
>
>
> *From:* Ted Nugent [mailto:tednugent73 at gmail.com]
> *Sent:* Wednesday, May 26, 2010 1:40 AM
> *To:* Johnny Crothers at Professional Services at DCNZ-WLG
> *Cc:* cisco-voip at puck.nether.net
> *Subject:* Re: [cisco-voip] [cisco-voi] Mixed mode Unity 7 - Exchange 2010
> and Exchange 2007
>
>
>
> According to this you should now be fine with the proper ES
>
>
>
>
> http://www.cisco.com/en/US/docs/voice_ip_comm/unity/7x/using_exch2010/usingex2010withcu7x5x.html
>
>
>
>
>
>
>
> On Mon, May 24, 2010 at 11:24 PM, <Johnny.Crothers at datacraft.co.nz> wrote:
>
> Hi everyone,
>
>
>
> I’ve tried to get my head around the documentation, but cant find a
> definitive answer.
>
>
>
> Can i have users on both Exchange 2007 mailstore and Exchange 2010? Its
> mainly for a transition between the two and I’m trying to pre-empt a
> customer enquiry.
>
>
>
> Thanks in advance!
>
>
>
>
>
> *****************************************************************************
>
> This email and all contents are subject to the following disclaimer:
>
>
>
> http://www.datacraft-asia.com/disclaimer
>
> *****************************************************************************
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
>
> *****************************************************************************
> This email and all contents are subject to the following disclaimer:
> http://www.datacraft-asia.com/disclaimer
> *****************************************************************************
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100525/e588d58a/attachment.html>