[cisco-voip] [cisco-voi] Mixed mode Unity 7 - Exchange 2010 and Exchange 2007

Tue May 25 18:49:50 EDT 2010

Hi Ted,

That would be great if you could J I'm looking to do it at some stage
for a customer but as of yet, not sure when that is!

Look forward to hearing your results (if you get the time)

Cheers,

Johnny

From: Ted Nugent [mailto:tednugent73 at gmail.com] 
Sent: Wednesday, May 26, 2010 9:28 AM
To: Johnny Crothers at Professional Services at DCNZ-WLG
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] [cisco-voi] Mixed mode Unity 7 - Exchange 2010
and Exchange 2007

Well it does but its pretty vague... I'm reading out on the NetPro that
there are still bugs around Exchange 2010 in general. I have one of
these I have to do myself in about a month and hoping there might be
some more ESs out to resolve some on the issues. If I get some free time
over the next couple weeks I'm going to attempt to lab this out and I'll
report back but no promises if i can't make the time.

Installing a New Cisco Unity 7.0 Server Into a Mixed Exchange
Environment and Choosing a Partner Server Other Than Exchange 2010

Do the procedure in this section to install a new Cisco Unity 7.0 server
that uses a mixed Exchange environment-including Exchange 2010
servers-and to configure Cisco Unity to use Exchange 2010 as a message
store but without using Exchange 2010 as the partner Exchange server.

To Install a New Cisco Unity 7.0 Server Into a Mixed Exchange
Environment and to Choose a Partner Server Other Than Exchange 2010

________________________________

Step 1  <http://www.cisco.com/en/US/i/templates/blank.gif> Install the
Cisco Unity server by following the applicable version of the
Installation Guide for Cisco Unity Release 5.x in a Unified Messaging
Configuration with Microsoft Exchange
athttp://www.cisco.com/en/US/products/sw/voicesw/ps2237/prod_installatio
n_guides_list.html
<http://www.cisco.com/en/US/products/sw/voicesw/ps2237/prod_installation
_guides_list.html> .

 <http://www.cisco.com/en/US/i/templates/note.gif> 

________________________________

Note  <http://www.cisco.com/en/US/i/templates/blank.gif> Content and
instructions in the 5.x guides apply to installing version 7.0 as well.
See also the "New Functionality" and "Changed Functionality" sections of
Release Notes for Cisco Unity Release 7.0(2)
athttp://www.cisco.com/en/US/docs/voice_ip_comm/unity/7x/release/notes/7
02curelnotes.html
<http://www.cisco.com/en/US/docs/voice_ip_comm/unity/7x/release/notes/70
2curelnotes.html> .

________________________________

Step 2  <http://www.cisco.com/en/US/i/templates/blank.gif> Update Cisco
Unity to function correctly with Exchange 2010. See the "Adding One or
More Exchange 2010 Servers to an Existing Cisco Unity 7.0 Installation"
section
<http://www.cisco.com/en/US/docs/voice_ip_comm/unity/7x/using_exch2010/u
singex2010withcu7x5x.html#wp46611> .

On Tue, May 25, 2010 at 4:39 PM, <Johnny.Crothers at datacraft.co.nz>
wrote:

Thanks for that Ted, however thats the same document i saw, from the
looks of things it will support multiple instances of Exchange 2010 but
it doesn't mention a mixed environment? Unless I've misread something in
there?

From: Ted Nugent [mailto:tednugent73 at gmail.com] 
Sent: Wednesday, May 26, 2010 1:40 AM
To: Johnny Crothers at Professional Services at DCNZ-WLG
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] [cisco-voi] Mixed mode Unity 7 - Exchange 2010
and Exchange 2007

According to this you should now be fine with the proper ES

http://www.cisco.com/en/US/docs/voice_ip_comm/unity/7x/using_exch2010/us
ingex2010withcu7x5x.html

On Mon, May 24, 2010 at 11:24 PM, <Johnny.Crothers at datacraft.co.nz>
wrote:

Hi everyone,

I've tried to get my head around the documentation, but cant find a
definitive answer.

Can i have users on both Exchange 2007 mailstore and Exchange 2010? Its
mainly for a transition between the two and I'm trying to pre-empt a
customer enquiry.

Thanks in advance!

************************************************************************
*****
This email and all contents are subject to the following disclaimer:

http://www.datacraft-asia.com/disclaimer
************************************************************************
*****

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

************************************************************************
*****
This email and all contents are subject to the following disclaimer:

http://www.datacraft-asia.com/disclaimer
************************************************************************
*****

*****************************************************************************
This email and all contents are subject to the following disclaimer:

http://www.datacraft-asia.com/disclaimer
*****************************************************************************
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100526/16cd452e/attachment.html>