[cisco-voip] VG202/224 SRST Configuration

[Wong, Gregory]

I¹m running a fully loaded 3845....


On 5/27/10 1:33 PM, "Jason Aarons (US)" <jason.aarons at us.didata.com> wrote:

> Unless you have a really big router a bunch of VG224s will overwhelm a
> 28XX/29XX.
>  
> I recall it¹s supported in newer IOS release, however I usually don¹t have a
> big enough router to handle VG224 and the phones.
>  
> 
> From: cisco-voip-bounces at puck.nether.net
> [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Wong, Gregory
> Sent: Thursday, May 27, 2010 1:14 PM
> To: cisco-voip at puck.nether.net
> Subject: [cisco-voip] VG202/224 SRST Configuration
>  
> Does anyone have a SRST/failover configuration for the VG202/224? I¹m
> currently running them in MGCP mode and there doesn¹t seem to be much info out
> there.
> 
> Thanks,
> Greg 
> 
> 
> Disclaimer: This e-mail communication and any attachments may contain
> confidential and privileged information and is for use by the designated
> addressee(s) named above only.  If you are not the intended addressee, you are
> hereby notified that you have received this communication in error and that
> any use or reproduction of this email or its contents is strictly prohibited
> and may be unlawful.  If you have received this communication in error, please
> notify us immediately by replying to this message and deleting it from your
> computer. Thank you.
> 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100527/7e6a7ecf/attachment.html>