[cisco-voip] VG202/224 SRST Configuration

[Jason Aarons (US)]

You can get 735 lines and SRST 7.1 support VG224
SRST 8.0 shows VG224 with 12.4.20T
Nothing shows VG202/204
http://www.cisco.com/en/US/prod/collateral/voicesw/ps6788/vcallcon/ps2169/data_sheet_c78-520521.html
http://www.cisco.com/en/US/docs/voice_ip_comm/cusrst/requirements/guide/srs80spc.html


From: Wong, Gregory [mailto:wong_gregory at emc.com]
Sent: Thursday, May 27, 2010 1:37 PM
To: Jason Aarons (US)
Cc: cisco-voip at puck.nether.net
Subject: Re: VG202/224 SRST Configuration

I'm running a fully loaded 3845....


On 5/27/10 1:33 PM, "Jason Aarons (US)" <jason.aarons at us.didata.com> wrote:
Unless you have a really big router a bunch of VG224s will overwhelm a 28XX/29XX.

I recall it's supported in newer IOS release, however I usually don't have a big enough router to handle VG224 and the phones.


From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Wong, Gregory
Sent: Thursday, May 27, 2010 1:14 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] VG202/224 SRST Configuration

Does anyone have a SRST/failover configuration for the VG202/224? I'm currently running them in MGCP mode and there doesn't seem to be much info out there.

Thanks,
Greg
________________________________

Disclaimer: This e-mail communication and any attachments may contain confidential and privileged information and is for use by the designated addressee(s) named above only.  If you are not the intended addressee, you are hereby notified that you have received this communication in error and that any use or reproduction of this email or its contents is strictly prohibited and may be unlawful.  If you have received this communication in error, please notify us immediately by replying to this message and deleting it from your computer. Thank you.



-----------------------------------------
Disclaimer: 

This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only.  If you are not the
intended addressee, you are hereby notified that you have received
this communication in error and that any use or reproduction of
this email or its contents is strictly prohibited and may be
unlawful.  If you have received this communication in error, please
notify us immediately by replying to this message and deleting it
from your computer. Thank you.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100527/0b0616c7/attachment.html>