[cisco-voip] international calling ... preemption

[Ted Nugent]

Old doc but premise is the same. see if that helps

http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a00805b6f33.shtml




On Thu, May 27, 2010 at 3:01 PM, Madziarczyk, Jonathan <
JMad at cityofevanston.org> wrote:

>  Thanks Ted and Kevin!
>
>
>
> I don’t understand voice translation-speak well enough to know what I just
> told it to do, but it seems to have put it into a format that my carrier
> likes so I’m good to go!  So thanks for that Ted.
>
>
>
> Now all I gotta do is figure out how to fix the inbound calls to prepend my
> off-net digit onto the caller id, so people can press redial from the phone
> to have it make a valid call. J
>
>
>
> Jon
>
>
>
>
>
>
>  ------------------------------
>
> *From:* Ted Nugent [mailto:tednugent73 at gmail.com]
> *Sent:* Thursday, May 27, 2010 11:58 AM
> *To:* Madziarczyk, Jonathan
> *Cc:* cisco-voip at puck.nether.net
> *Subject:* Re: [cisco-voip] international calling ... preemption
>
>
>
> Try this
>
>
>
> voice translation-rule 1
>
>  rule 1 // // type any international plan any isdn
>
> !
>
> voice translation-profile international
>
>  translate called 1
>
>
>
>
>
> dial-peer voice 1 pots
>
>  translation-profile outgoing international
>
>  destination-pattern 8011T
>
>  Port 0/0/0:23
>
>
>
>
>
> On Thu, May 27, 2010 at 11:47 AM, Madziarczyk, Jonathan <
> JMad at cityofevanston.org> wrote:
>
> So I’m trying to set up some basic international calling on my H323
> gateway.  But I’m getting a preemption error in my Q931 debugs and a fast
> busy on the phone.  Is the problem on the Gateway or on the PSTN side, and
> how can I tell?
>
>
>
> Dial-peer voice 1 pots
>
> Destination-pattern 9011…......... (12 periods)
>
> Direct-inward-dial
>
> Port 0/0/0 :23
>
>
>
> My Q931 looks something like this :
>
> May 27 15:04:24.818: ISDN Se0/0/0:23 Q931: TX -> SETUP pd = 8  callref =
> 0x0090
>
>         Bearer Capability i = 0x8090A2
>
>                 Standard = CCITT
>
>                 Transfer Capability = Speech
>
>                 Transfer Mode = Circuit
>
>                 Transfer Rate = 64 kbit/s
>
>         Channel ID i = 0xA98397
>
>                 Exclusive, Channel 23
>
>         Calling Party Number i = 0x2181, 'mynumber'
>
>                 Plan:ISDN, Type:National
>
>         Called Party Number i = 0x91, '011442074999000'
>
>                 Plan:ISDN, Type:International
>
> May 27 15:04:24.878: ISDN Se0/0/0:23 Q931: RX <- RELEASE_COMP pd = 8
> callref = 0x8090
>
>         Cause i = 0xC088 – Preemption
>
>
>
> Ideas?
>
>
>
> JM
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100527/1f6f59c1/attachment.html>