[cisco-voip] 1 Unity Connection with 2 CM clusters

[Ryan Ratliff]

You can either use a dual integration (if UC can do this) or set up a qsig tunneled ICT between the two CUCM clusters.  Have a route pattern pointing to that trunk for the numbers that exist on the other cluster and MWIs will be passed between.

-Ryan

On May 28, 2010, at 9:37 AM, Sandy Lee wrote:

> Hi,
>  
> We’re migrating from CUCM 4.1(3) to UCM 7.1(3) with a new server migration approach. We have a Unity Connection 7.1(3) that is already SCCP integrated with the CUCM 4.1(3).
>  
> My question is how do I deal with my 4.1(3) cluster for the MWIs to continue working? In the lab, I configured the SIP integration for the UCM 7.1(3) and it worked just fine, but MWIs stopped working for the 4.1(3) guys.
>  
> In the doc, it says that I need to do a translation pattern, but there’s no example. Did anyone of you went through this and could give me an example?
>  
> Any help would be appreciated.
>  
> Thanks and regards.
>  
> Sandy.
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100528/6e60eb2d/attachment.html>