[cisco-voip] Save/Reset/Apply Config

[Ed Leatherman]

My guess was that there were some operations that did not require a
device reset/restart - therefore the apply config would choose the
least interruption method. Maybe someone has a better idea.

On Sat, May 29, 2010 at 2:25 PM, Jason Aarons (US)
<jason.aarons at us.didata.com> wrote:
> I’ve been meaning to ask why the new Apply Config, since it warns you to hit
> Save first, why not hit Save/Reset and forget about Apply Config ? I must be
> mis-understanding what it’s for and why it got added -jason
>
> ________________________________
>
> Disclaimer: This e-mail communication and any attachments may contain
> confidential and privileged information and is for use by the designated
> addressee(s) named above only. If you are not the intended addressee, you
> are hereby notified that you have received this communication in error and
> that any use or reproduction of this email or its contents is strictly
> prohibited and may be unlawful. If you have received this communication in
> error, please notify us immediately by replying to this message and deleting
> it from your computer. Thank you.
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>



-- 
Ed Leatherman