[cisco-voip] Save/Reset/Apply Config

[Mike Thompson]

As I understand it (haven't tested it yet), save doesn't reset anything.it
just puts it in the database.  The apply actually pushes it to the phone and
prompts a reboot.

 

You can save a bunch of devices then apply a 'batch' of devices to cause the
reboots.

 

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Jason Aarons (US)
Sent: Saturday, May 29, 2010 2:25 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Save/Reset/Apply Config

 

I've been meaning to ask why the new Apply Config, since it warns you to hit
Save first, why not hit Save/Reset and forget about Apply Config ? I must be
mis-understanding what it's for and why it got added -jason

  _____  

Disclaimer: This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the designated
addressee(s) named above only. If you are not the intended addressee, you
are hereby notified that you have received this communication in error and
that any use or reproduction of this email or its contents is strictly
prohibited and may be unlawful. If you have received this communication in
error, please notify us immediately by replying to this message and deleting
it from your computer. Thank you. 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100530/ec20c628/attachment.html>