[cisco-voip] CFW via ICT and no Caller Name

[Ryan Ratliff]

What is the calling party selection on the 6.1 ICT?
Do you have Display IE enabled on the ICT (both clusters)?

Alternatively is Q.sig tunneling enabled on the ICT (both sides)?  

-Ryan

On Nov 1, 2010, at 4:58 PM, <Johnny.Crothers at datacraft.co.nz> <Johnny.Crothers at datacraft.co.nz> wrote:

Hi everyone,
 
I’m not entirely sure this is possible and haven’t been able to find anything that I can work with to get this going.
 
What we have is the following:
 
CUCM 4.1.3 -> ICT -> CUCM 6.1.5
 
Phone B on CUCM 6.1.5 CFW’s to Phone A on CUCM 4.1.3.
 
When Phone B is called, Phone A only displays Phone B’s Extension, not the Caller Name.
 
When Phone B is CFW’d to Phone C which is also on CUCM 6.1.5 (The same applies for a CUCM 4.1.3 scenerio) the Caller Name is displayed correctly.
 
Anyone got any idea’s as to why there is no Caller Name across a non-gatekeeper controlled ICT between CUCM 6.1.5 and CUCM 4.1.3?
 
Cheers,
 
Johnny
*****************************************************************************
This email and all contents are subject to the following disclaimer:

http://www.datacraft-asia.com/disclaimer
*****************************************************************************
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20101102/7e0cf253/attachment.html>