[cisco-voip] VG224 SCCP analog conferencing

[Nate VanMaren]

But to add the 2nd you have to put the first on hold and dial the 2nd.  You need a 2nd call for that.

From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Kevin Damisch
Sent: Thursday, November 04, 2010 1:42 PM
To: Jason Aarons (US); cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] VG224 SCCP analog conferencing

Wait a minute though.....

If you are on a 3-way conference call, the port only sees it as a single call, correct?    Think of your IP phone when you see "To Conference".  It is only one call. If that is true, then I should be able to conference in another person.

From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Kevin Damisch
Sent: Thursday, November 04, 2010 2:23 PM
To: Jason Aarons (US); cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] VG224 SCCP analog conferencing

This is one of those times when I can say "Oh.....Duh!"  Thanks Jason!

From: Jason Aarons (US) [mailto:jason.aarons at us.didata.com]
Sent: Thursday, November 04, 2010 2:22 PM
To: Kevin Damisch; cisco-voip at puck.nether.net
Subject: RE: VG224 SCCP analog conferencing

No, maximum number of calls at bottom of Device > Gateway > VG224 > Port 2/0/0 is 2 (default is 1) That means one flashhook to add one other party.

[cid:image001.png at 01CB7C4A.EA57FC50]

From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Kevin Damisch
Sent: Thursday, November 04, 2010 2:53 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] VG224 SCCP analog conferencing

If we have analog phones connected to a SCCP VG224 port, we should be able to make conference calls with the max participants as specified in the service parameters, correct?  So, we can simply dial an extension for a 2-party call, then hookflash, dial another extension, hookflash again.  At that point, we have a 3-way conference.  Then, can we continue to use hookflash again, and add more participants similar to the Confrn softkey on an IP phone?  Just curious if there was a limitation in doing this from an analog port.  Since it is a SCCP port, I would think that it would be handled like a normal IP phone, right?  I don't have one handy to test this out.

Thanks,
Kevin

________________________________

This communication (including any attachments) is intended only for the use of the individual or entity to which it is addressed, and may contain information that is privileged, confidential and exempt from disclosure under applicable law. If you are not the intended recipient, any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please notify Vital Support Systems at 515 334 5700 and delete or destroy all copies and the original document.
________________________________

Disclaimer: This e-mail communication and any attachments may contain confidential and privileged information and is for use by the designated addressee(s) named above only. If you are not the intended addressee, you are hereby notified that you have received this communication in error and that any use or reproduction of this email or its contents is strictly prohibited and may be unlawful. If you have received this communication in error, please notify us immediately by replying to this message and deleting it from your computer. Thank you.

________________________________

This communication (including any attachments) is intended only for the use of the individual or entity to which it is addressed, and may contain information that is privileged, confidential and exempt from disclosure under applicable law. If you are not the intended recipient, any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please notify Vital Support Systems at 515 334 5700 and delete or destroy all copies and the original document.

________________________________

This communication (including any attachments) is intended only for the use of the individual or entity to which it is addressed, and may contain information that is privileged, confidential and exempt from disclosure under applicable law. If you are not the intended recipient, any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please notify Vital Support Systems at 515 334 5700 and delete or destroy all copies and the original document.


 NOTICE: This email message is for the sole use of the intended recipient(s) and may contain confidential and privileged information. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply email and destroy all copies of the original message.


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20101104/a974340f/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.png
Type: image/png
Size: 7806 bytes
Desc: image001.png
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20101104/a974340f/attachment.png>