[cisco-voip] Any Informacast Users? with MPLS?

[Scott Voll]

relay of some sort?  are you talking about the router module that has an
instance of InformaCast?  if so, how does that work with enterprise
installs.

Scott

On Tue, Nov 9, 2010 at 8:04 AM, Buchanan, James <jbuchanan at presidio.com>wrote:

> The MPLS provider does not support multicast routing across the WAN.
>
>
>
> I have worked around this in the past by using a GRE tunnel. Basically, you
> create a multicast route (ip mroute) to route the multicast traffic through
> the GRE tunnel, which is essentially a simulated layer 2 connection through
> the MPLS network.
>
>
>
> It is possible Singlewire has a relay of some sort for this situation as
> well that would allow you to avoid a GRE tunnel.
>
>
>
> *James Buchanan *|* Technology Manager, UC *| *South Region *|* Presidio
> Networked Solutions
> 12 Cadillac Dr, Suite 130, Brentwood, TN 37027 *|* **
> jbuchanan at presidio.com <jbuchanan at ctiusa.com>
> **D: 615-866-5729* | *F:* *615-866-5781* | *www.presidio.com*
>
> *CCIE #25863, Voice*
>
>
>
> *From:* cisco-voip-bounces at puck.nether.net [mailto:
> cisco-voip-bounces at puck.nether.net] *On Behalf Of *Jeff Ruttman
> *Sent:* Tuesday, November 09, 2010 9:12 AM
> *To:* Cisco VOIP
> *Subject:* [cisco-voip] Any Informacast Users? with MPLS?
>
>
>
> Greetings,
>
>
>
> We're changing out some point to point circuits with MPLS circuits.  The
> audio on a page via Informacast no longer makes it through.  The phones
> beep, so the connection is made, but audio is silent.  The point to point
> circuits are working just fine.
>
>
>
> Long shot, I know, but any ideas out there?
>
>
>
> Thanks
>
> jeff
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20101109/a151f361/attachment.html>