[cisco-voip] Connecting analog fxo to CUCM (what protocol?)

[Ryan Ratliff]

You won't get FXO MGCP caller id on CUCM 6.x.

-Ryan

On Nov 9, 2010, at 2:35 PM, Madziarczyk, Jonathan wrote:

Running CUCM 6.x
2821 with 2 fxo cards
 
Nothing special, routing calls from my PRI on CUCM to another PBX for things like TTY and automated dialers (elevators, etc) and voice calls.
 
I feel as if there is a plethora of different options for connecting the FXOs to CUCM
H.323
MGCP
Is it still just user preference or are there reasons to go with one or the other for something like a TTY?
 
I think I remember hearing caller id now works with MGCP (used to only be H323)
 
 
 
Suggestions?  Ideas?
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20101109/f0bce66c/attachment.html>