[cisco-voip] Unity Express 8.0.2 > CallManager 8.0 > ccmadmin > CTI Route Points show un-registered

[Jason Aarons (US)]

How do you go about re-registering CTI Route Point/CTI Ports in CUE 8.x to CallManager 8.x?

We had a WAN outage and the ports became un-registered.  Once the WAN came back up the CTI Route Points didn't re-register (bug?) back to CallManager.

Is there something I can type on the CUE CLI to get the CTI Route Points to re-register?  I did a reload which fixed it, but not the commands I was looking for.


-----------------------------------------
Disclaimer:

This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only.  If you are not the
intended addressee, you are hereby notified that you have received
this communication in error and that any use or reproduction of
this email or its contents is strictly prohibited and may be
unlawful.  If you have received this communication in error, please
notify us immediately by replying to this message and deleting it
from your computer. Thank you.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20101129/f6c08690/attachment.html>