[cisco-voip] Unity Express 8.0.2 > CallManager 8.0 > ccmadmin > CTI Route Points show un-registered

[Lelio Fulgenzi]

I tried a whole bunch of things, changing and saving configs for the dial in numbers. I didn't try unchecking the enabled button, saving, checking the enable button and saving again. 

I ended up reloading as well. 

Sent from my iPod

On Nov 29, 2010, at 11:55 AM, "Jason Aarons (US)" <jason.aarons at us.didata.com> wrote:

> How do you go about re-registering CTI Route Point/CTI Ports in CUE 8.x to CallManager 8.x?
> 
>  
> 
> We had a WAN outage and the ports became un-registered.  Once the WAN came back up the CTI Route Points didn’t re-register (bug?) back to CallManager.
> 
>  
> 
> Is there something I can type on the CUE CLI to get the CTI Route Points to re-register?  I did a reload which fixed it, but not the commands I was looking for.
> 
> Disclaimer: This e-mail communication and any attachments may contain confidential and privileged information and is for use by the designated addressee(s) named above only. If you are not the intended addressee, you are hereby notified that you have received this communication in error and that any use or reproduction of this email or its contents is strictly prohibited and may be unlawful. If you have received this communication in error, please notify us immediately by replying to this message and deleting it from your computer. Thank you.
> 
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20101129/481bf157/attachment.html>