[cisco-voip] Any known issues with CallManager 8.0(3) and original 7940 and 7940G/SCCP ?

[Ryan Ratliff]

No known issues I can think of and I believe you are correct on the G vs non-G.  

-Ryan

On Oct 1, 2010, at 10:55 AM, Jason Aarons (US) wrote:

Any known problems using CUCM 8.0(3) with original 7940? The model before the 7940G?
 
Don’t remember the original 7940 and what changed with 7940G ?                                            Hint: One big visible change was English on the 7940 phone buttons instead of the stick on label 7940G!
http://www.voipuser.org/review_21.html
 



Disclaimer: This e-mail communication and any attachments may contain confidential and privileged information and is for use by the designated addressee(s) named above only. If you are not the intended addressee, you are hereby notified that you have received this communication in error and that any use or reproduction of this email or its contents is strictly prohibited and may be unlawful. If you have received this communication in error, please notify us immediately by replying to this message and deleting it from your computer. Thank you.

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20101001/7325f424/attachment.html>