[cisco-voip] Any known issues with CallManager 8.0(3) and original 7940 and 7940G/SCCP ?

[Charles Goldsmith]

Jason, I have a number of these phones on an 8.0(2) deployment with no
issues.  While upgrading  from 7 to 8, we did have a problem with BLF, but
that was due to phone firmware, we had to do an intermediate step of code to
get them to upgrade properly.

Everything else seems to be fine.

Charles

On Fri, Oct 1, 2010 at 9:55 AM, Jason Aarons (US) <
jason.aarons at us.didata.com> wrote:

> Any known problems using CUCM 8.0(3) with original 7940? The model before
> the 7940G?
>
>
>
> Don’t remember the original 7940 and what changed with 7940G
> ?                                            Hint: One big visible change
> was English on the 7940 phone buttons instead of the stick on label 7940G!
>
> http://www.voipuser.org/review_21.html
>
>
>
> ------------------------------
>
> [image: 0ede5e1b-f.gif]<http://www.dimensiondata.com/_layouts/forms.aspx?FormID=204>
>
> * Disclaimer: This e-mail communication and any attachments may contain
> confidential and privileged information and is for use by the designated
> addressee(s) named above only. If you are not the intended addressee, you
> are hereby notified that you have received this communication in error and
> that any use or reproduction of this email or its contents is strictly
> prohibited and may be unlawful. If you have received this communication in
> error, please notify us immediately by replying to this message and deleting
> it from your computer. Thank you. *
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20101001/7f9c1ac7/attachment.html>