[cisco-voip] Built In Bridge Information/Issue

[H, Tim]

I received one response saying that they thought Built in Bridge only supports G711.  Can anyone else confirm this?

Thanks,

Tim

From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of H, Tim
Sent: Monday, October 04, 2010 11:30 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Built In Bridge Information/Issue

All,

I have a CUCM 7.13 cluster in a central data center serving several remote sites.  Each site has Call Center Agents (UCCX 7).  I'm attempting to use the Built In Bridge functionality for call recording.  I've double checked all settings on CUCM all built in bridges are turned on, recording devices are enable, recording profile is setup, route pattern pointing to a SIP trunk is all functional.  When I do a packet capture on the recording device, I only see RTP streams from one remote site.  All of the IP phones are compatible 7962G phones.  Does anyone else have a similar setup?  Does available DSPs come into play on this one since calls are traveling across the WAN using G729?

Any help is appreciated.

Thanks,

Tim
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20101005/d29f921b/attachment.html>