[cisco-voip] Call forward all in CUCM 7.1

[Anthony Kouloglou]

  Hi,
i have done that and it didn't work.
I will check again but i think i will do what i want to do with a hunt 
pilot, a hunt list and a line group.
I just wanted to know if there is an extra trick with that config (some 
enterprise parameter that does not allow that)

Thanks
Again Antonis

On 6/10/2010 15:47, Derek Wyss wrote:
>
> Change the CFA CSS to a different CSS that contains phone C’s route 
> partition.
>
> *Derek Wyss*
>
> *From:* cisco-voip-bounces at puck.nether.net 
> [mailto:cisco-voip-bounces at puck.nether.net] *On Behalf Of *Anthony 
> Kouloglou
> *Sent:* Wednesday, October 06, 2010 2:04 AM
> *To:* cisco-voip at puck-nether.net
> *Subject:* [cisco-voip] Call forward all in CUCM 7.1
>
> Hi,
> If extension B has CFALL to extension C and
> extension A calls B but the line CSS of A,  does not allow A to call 
> C, will the call succeed?
> A is allowed to call B.
>
> If no, how can i make this work?
>
> Thanks a lot
> Anthony
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20101006/e6f9e5dc/attachment.html>