[cisco-voip] Monitor Q931 debug

[Bill]

Would I just send the entire debug to the syslog server? I have a 3845 with
16 PRI's terminated in it. Won't that max out the processor? 

 

Also how can I keep the debug going if the router restarts? 

 

  _____  

From: Ben Story [mailto:ben.story at gmail.com] 
Sent: Wednesday, October 06, 2010 1:19 PM
To: Bill
Subject: Re: [cisco-voip] Monitor Q931 debug

 

syslog with swatch or logwatch would do the trick.

On Wed, Oct 6, 2010 at 1:07 PM, Bill <bill at hitechconnection.net> wrote:

 

I am making some changes to the dial-peers and removing a lot of the generic
matching strings such as destination-pattern 1. to more specific digits that
the Telco is sending. I am 99% confidant I have all of the patterns but I
want to make sure I am not missing anything. I have a debug output of a
failed call setup and I basically want to monitor for this specific string:

 

Cause i = 0x8081 - Unallocated/unassigned number

 

I have CS-MARS and other systems I can use but I am just wondering what the
best way would be to monitor for this event? 

 

 

 

 


_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip




-- 
--
Ben Story 
CCSP, CCNA, CCNA Wireless, CCDA
ben.story at gmail.com

"You cannot escape the responsibility of tomorrow by evading it today. --
Abraham Lincoln

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20101006/cf34a0a5/attachment.html>