[cisco-voip] FW: Analog Lines and Caller ID

[Norton, Mike]

You didn't say what versions you're running. IIRC, caller ID on MGCP FXO requires IOS 15 on the gateway and CUCM 8 on the cluster.

--
Mike Norton
I.T. Support
Peace Wapiti School Division No. 76
Helpdesk: 780-831-3080
Direct: 780-831-3076


From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Jeff Ruttman
Sent: October-06-10 7:12 AM
To: Cisco VOIP
Subject: [cisco-voip] FW: Analog Lines and Caller ID

Should have added that on incoming calls the phone displays "from unknown number."

________________________________
From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Jeff Ruttman
Sent: Wednesday, October 06, 2010 7:25 AM
To: Cisco VOIP
Subject: [cisco-voip] Analog Lines and Caller ID
Greetings,

If a site had a range of DIDs ported to a few analog phones lines connected to a voice gateway with FXO/FXS and an MGCP config, would you expect to be able to get caller ID on inbound calls?  If so, and it's not happening, what might my config be missing?  Or is it more likely that I need to contact the telco to get caller ID delivered?

Or will caller ID just not work with such a setup?

Thanks
jeff
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20101007/e5d5c86e/attachment.html>