[cisco-voip] MCS78235-I3 Installation Failed USB diagnostics

[Cristobal Priego]

i've seen it before when i was installing version 7.0 when it was first
released
and i opened a TAC case too.
I had to re-install the application using a dvd

in my case the installation failed because i didn;t have a dns server

2010/10/13 Jason Aarons (US) <jason.aarons at us.didata.com>

> New out of box MCS7835I3-K9-CMD1, has 8.0.2.40000-1 pre-installed on hard
> drive from factory, it asked for network info, then was copying files when
> Installation Failed message appeared.  Anyone seen this?
>
>
>
> I’m uploading the USB diagnostics file to a TAC case 615717759. Going to
> try burning an image of 7.1.3.32900-4 to DVD.
>
>
>
> I like the pre-installed hard drive media, but shouldn’t a backup disk be
> included too? I’m going to start looking in the many boxes….400 phone
> deployment.
>
>
>
> ------------------------------
>
> * Disclaimer: This e-mail communication and any attachments may contain
> confidential and privileged information and is for use by the designated
> addressee(s) named above only. If you are not the intended addressee, you
> are hereby notified that you have received this communication in error and
> that any use or reproduction of this email or its contents is strictly
> prohibited and may be unlawful. If you have received this communication in
> error, please notify us immediately by replying to this message and deleting
> it from your computer. Thank you. *
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20101013/ced32ef3/attachment.html>