[cisco-voip] What is the best way to partially register phones with UCM?

[Wes Sisk]

depending on your deployment model this is also what TAPS is designed for:

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/bat/8_0_2/t18taps.html

/Wes

cips wrote:
> Using BAT, create and test the necessary templates. Next schedule the job to
> run before deployment starts, preferably over night.
>
> -----Original Message-----
> From: cisco-voip-bounces at puck.nether.net
> [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Charles
> Sent: donderdag 14 oktober 2010 20:10
> To: voyp list
> Subject: [cisco-voip] What is the best way to partially register phones with
> UCM?
>
> To the UCM experts:
>
> I need to deploy some new phones with my existing UCM. I want to do this
> ahead of time and would like to deploy during the cutover time. What would
> be the best way to do this?
>
> I would appreciate your input.
>
> Intrested in Voip.
>
>
>       
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>