[cisco-voip] Using USB cable with 7925G to Backup/Restore profile, EAP-FAST username not stored in cfg

[Jason Aarons (US)]

I have 100 7925s, so I setup my first 7925, tested it with EAP-FAST, works great.

I then used the USB interface on the 7925 to backup to .cfg file.

However when I restore I notice my EAP-FAST username/password is not restored.  Any way to keep the username/password in .cfg ?


-----------------------------------------
Disclaimer:

This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only.  If you are not the
intended addressee, you are hereby notified that you have received
this communication in error and that any use or reproduction of
this email or its contents is strictly prohibited and may be
unlawful.  If you have received this communication in error, please
notify us immediately by replying to this message and deleting it
from your computer. Thank you.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20101015/13bd1180/attachment.html>