[cisco-voip] VG224 not lighting lamp during ringing or for MWI
Lelio Fulgenzi
lelio at uoguelph.ca
Fri Oct 15 15:41:43 EDT 2010
that's a great resource, thanks!
lelio
---
Lelio Fulgenzi, B.A.
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Cooking with unix is easy. You just sed it and forget it.
- LFJ (with apologies to Mr. Popeil)
From: "Nate VanMaren" <VanMarenNP at ldschurch.org>
To: "Lelio Fulgenzi" <lelio at uoguelph.ca>, "Ahmed Elnagar" <ahmed_elnagar at rayacorp.com>
Cc: "voyp list" <cisco-voip at puck.nether.net>
Sent: Friday, October 15, 2010 3:09:21 PM
Subject: RE: [cisco-voip] VG224 not lighting lamp during ringing or for MWI
Does this help?
http://www.sandman.com/messwait.html
From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Lelio Fulgenzi
Sent: Friday, October 15, 2010 9:55 AM
To: Ahmed Elnagar
Cc: voyp list
Subject: Re: [cisco-voip] VG224 not lighting lamp during ringing or for MWI
Thanks for everyone's feedback. It certainly looks like this is the case.
I wonder if consumer level phones will work rather than PBX phones.
---
Lelio Fulgenzi, B.A.
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Cooking with unix is easy. You just sed it and forget it.
- LFJ (with apologies to Mr. Popeil)
From: "Ahmed Elnagar" <ahmed_elnagar at rayacorp.com>
To: "Lelio Fulgenzi" <lelio at uoguelph.ca>
Cc: "voyp list" <cisco-voip at puck.nether.net>
Sent: Friday, October 15, 2010 11:42:35 AM
Subject: RE: [cisco-voip] VG224 not lighting lamp during ringing or for MWI
I had a lot of testing long time ago in this topic and the end result was that it won’t work easily L
Most of PBX vendors analog phones requires more voltage than the VG supply to lit the MWI, or uses their propriety signaling to lit it.
Best Regards;
Ahmed Elnagar
Senior Network PS Engineer
Mob: +2019-0016211
CCIE#24697 (Voice)
ccie_voice_large.gif
From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Jason Aarons (US)
Sent: Friday, October 15, 2010 5:31 PM
To: Lelio Fulgenzi; voyp list
Subject: Re: [cisco-voip] VG224 not lighting lamp during ringing or for MWI
Some of those phones need more voltage than the VG224 can provide and won’t work (eg 90 Volt)
http://puck.nether.net/pipermail/cisco-voip/2007-August/025181.html
From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Lelio Fulgenzi
Sent: Friday, October 15, 2010 10:31 AM
To: voyp list
Subject: [cisco-voip] VG224 not lighting lamp during ringing or for MWI
I have a VG224 that is not lighting the phone lamp during ring-in or for MWI.
Any ideas?
I'm searching the list as we speak...
---
Lelio Fulgenzi, B.A.
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Cooking with unix is easy. You just sed it and forget it.
- LFJ (with apologies to Mr. Popeil)
Disclaimer: This e-mail communication and any attachments may contain confidential and privileged information and is for use by the designated addressee(s) named above only. If you are not the intended addressee, you are hereby notified that you have received this communication in error and that any use or reproduction of this email or its contents is strictly prohibited and may be unlawful. If you have received this communication in error, please notify us immediately by replying to this message and deleting it from your computer. Thank you.
Disclaimer: NOTICE The information contained in this message is confidential and is intended for the addressee(s) only. If you have received this message in error or there are any problems please notify the originator immediately. The unauthorized use, disclosure, copying or alteration of this message is strictly forbidden. Raya will not be liable for direct, special, indirect or consequential damages arising from alteration of the contents of this message by a third party or as a result of any malicious code or virus being passed on. Views expressed in this communication are not necessarily those of Raya.If you have received this message in error, please notify the sender immediately by email, facsimile or telephone and return and/or destroy the original message.
NOTICE: This email message is for the sole use of the intended recipient(s) and may contain confidential and privileged information. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply email and destroy all copies of the original message.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20101015/33174b8a/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.jpg
Type: image/jpeg
Size: 1801 bytes
Desc: image001.jpg
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20101015/33174b8a/attachment.jpg>
More information about the cisco-voip
mailing list