[cisco-voip] CME as SRST Configuration

[Dew Swen]

Hi Matthew,

If you are not using call-manager-fallback option (regular SRST) and using
CME as SRST, you need dial peers in order to forward the calls.

*--*
*Dew Swen
CCVP, CCDP, CCNP

*


On Fri, Oct 15, 2010 at 5:29 PM, Matthew Loraditch <
MLoraditch at heliontechnologies.com> wrote:

> So I am trying this out as opposed to traditional SRST and have a couple of
> questions. Regular SRST has the default destination concept where I can
> basically send any undefined incoming calls to an extension of my choice.
> That doesn’t exist in CME-SRST. I presume I now need to setup dial-peers to
> deal with all my various incoming call scenarios.
>
>
>
> If my incoming digits match a registered phone’s extension will they still
> go directly to the phone or do I need a dial peer for that as well?
>
>
>
> Thanks!
>
>
>
>
>
> *Matthew Loraditch, CCVP, CCNA, CCDA*
> 1965 Greenspring Drive
>
> Timonium, MD 21093
> support at heliontechnologies.com
> (p) (410) 252-8830
> (F) (443) 541-1593
>
> Visit us at www.heliontechnologies.com
> Support Issue? Email support at heliontechnologies.com for fast assistance!
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20101016/b4d6fa13/attachment.html>