[cisco-voip] Globalization Localization of ANI

[Nate VanMaren]

I would suggest instead of putting localized access codes on the numbers, globalize them as in the recommendation in the 7.x + SRND.  Use + encoded E.164s.

-Nate

From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Mike Lydick
Sent: Wednesday, October 20, 2010 6:15 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Globalization Localization of ANI

We are trying to fixup ANI in the Directories (Missed, Received). It should be possible to prepend [9,91,9011] to ANI with transformation patterns applied at the CM gateway based on the area code and country code (if call is local it gets 9 other get 91, 0 gets 9011). This is working on a softphone but not ip phones.

The next step would be to localize the ANI presentation to the display (strip the 9) if possible but not affect the call logs.

Does someone have this or something similar working? We are a mixed mgcp/h323 environment so we are looking to keep this in the CM.


Best Regards,

Mike Lydick


 NOTICE: This email message is for the sole use of the intended recipient(s) and may contain confidential and privileged information. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply email and destroy all copies of the original message.


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20101020/4e53b3e5/attachment.html>