[cisco-voip] Globalization Localization of ANI

[Mike Lydick]

Not quite ready to install a new dial plan. But yes that is what I am trying
to do with a 9 instead of +. Have it working on a softphone but the IP Phone
behaves differently. Not sure why?


Best Regards,

Mike Lydick




On Wed, Oct 20, 2010 at 10:48 AM, Nate VanMaren <VanMarenNP at ldschurch.org>wrote:

>  I would suggest instead of putting localized access codes on the numbers,
> globalize them as in the recommendation in the 7.x + SRND.  Use + encoded
> E.164s.
>
>
>
> -Nate
>
>
>
> *From:* cisco-voip-bounces at puck.nether.net [mailto:
> cisco-voip-bounces at puck.nether.net] *On Behalf Of *Mike Lydick
> *Sent:* Wednesday, October 20, 2010 6:15 AM
> *To:* cisco-voip at puck.nether.net
> *Subject:* [cisco-voip] Globalization Localization of ANI
>
>
>
> We are trying to fixup ANI in the Directories (Missed, Received). It should
> be possible to prepend [9,91,9011] to ANI with transformation patterns
> applied at the CM gateway based on the area code and country code (if call
> is local it gets 9 other get 91, 0 gets 9011). This is working on a
> softphone but not ip phones.
>
>
>
> The next step would be to localize the ANI presentation to the display
> (strip the 9) if possible but not affect the call logs.
>
>
>
> Does someone have this or something similar working? We are a mixed
> mgcp/h323 environment so we are looking to keep this in the CM.
>
>
>
>
>
> Best Regards,
>
> Mike Lydick
>
>
>
> NOTICE: This email message is for the sole use of the intended recipient(s)
> and may contain confidential and privileged information. Any unauthorized
> review, use, disclosure or distribution is prohibited. If you are not the
> intended recipient, please contact the sender by reply email and destroy all
> copies of the original message.
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20101020/5319b322/attachment.html>