[cisco-voip] CUCM V8 Raid array configuration

[Dennis Heim]

Is your model on the supported hardware list?

Dennis Heim
Network Voice Engineer
CDW  Advanced Technology Services
11711 N. Meridian Street, Suite 225
Carmel, IN  46032

317.569.4255 Office/Home Office
317.569.4201 Fax
317.694.6070 Cell
dennis.heim at cdw.com<mailto:dennis.heim at cdw.com>
cdw.com/content/solutions/unified-communications/<http://www.cdw.com/content/solutions/unified-communications/>


From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Bill
Sent: Thursday, October 21, 2010 12:51 PM
To: 'James Edmondson'; cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] CUCM V8 Raid array configuration

I don't understand your question. The software configures the drives based on the install script. You should not need to modify anything.

________________________________
From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of James Edmondson
Sent: Thursday, October 21, 2010 12:40 PM
To: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] CUCM V8 Raid array configuration

Anyone tell me why cucm v8 only let's you install raid 0+1 with 2 hard
drives?  I have an mcs 7835 with 8 bays for drives, unity connection
install is the same way why !?!? Any help around this road block is much
appreciated.

James
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20101021/5089e711/attachment.html>