[cisco-voip] CUCM V8 Raid array configuration

[James Edmondson]

Bill,
I wanted to utilize the 4 hard drives i have for this server, and use a Raid
5, however once that is configured via the HP Raid Array, i insert the CUCM
V8 Install disk and it immediately changes the array back to Raid 0+1 and
only 2 drives, the other two drives are unassigned.

Dennis,
Yes the model is on the supported hardware list, its an MCS 7835H2, just re
read the Data sheet and it says only supports raid 1.




On Thu, Oct 21, 2010 at 12:51 PM, Dennis Heim <Dennis.Heim at cdw.com> wrote:

> Is your model on the supported hardware list?
>
>
>
> Dennis Heim
> Network Voice Engineer
> CDW  Advanced Technology Services
> 11711 N. Meridian Street, Suite 225
> Carmel, IN  46032
>
> 317.569.4255 Office/Home Office
> 317.569.4201 Fax
> 317.694.6070 Cell
>
> dennis.heim at cdw.com
> cdw.com/content/solutions/unified-communications/<http://www.cdw.com/content/solutions/unified-communications/>
>
>
>
>
>
> *From:* cisco-voip-bounces at puck.nether.net [mailto:
> cisco-voip-bounces at puck.nether.net] *On Behalf Of *Bill
> *Sent:* Thursday, October 21, 2010 12:51 PM
> *To:* 'James Edmondson'; cisco-voip at puck.nether.net
>
> *Subject:* Re: [cisco-voip] CUCM V8 Raid array configuration
>
>
>
> I don’t understand your question. The software configures the drives based
> on the install script. You should not need to modify anything.
>
>
> ------------------------------
>
> *From:* cisco-voip-bounces at puck.nether.net [mailto:
> cisco-voip-bounces at puck.nether.net] *On Behalf Of *James Edmondson
> *Sent:* Thursday, October 21, 2010 12:40 PM
> *To:* cisco-voip at puck.nether.net
> *Subject:* Re: [cisco-voip] CUCM V8 Raid array configuration
>
>
>
> Anyone tell me why cucm v8 only let's you install raid 0+1 with 2 hard
> drives?  I have an mcs 7835 with 8 bays for drives, unity connection
> install is the same way why !?!? Any help around this road block is much
> appreciated.
>
> James
>



-- 
James
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20101021/eff5e9af/attachment.html>