[cisco-voip] RFQ for SIP

[Haas, Neal]

Thanks for the help, we need to get off this traditional PRI connection, hopefully to save money...

Neal Haas

1020 S 10th St
Fresno, CA  93702
Desk 559.600.5890

From: cmstaffin at gmail.com [mailto:cmstaffin at gmail.com] On Behalf Of Craig Staffin
Sent: Friday, October 22, 2010 11:28 AM
To: Haas, Neal
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] RFQ for SIP

Neal,

Fax support T.38
G711 and G729 support
SIP TCP or UDP support
Allow for mid call codec negotiation
Site redundancy in CUBE routers is a must if possible

I would honestly take a look at Global Crossing.  I have worked with all of the major carriers with SIP and so far they are the only ones that seem to "get it" and have their act together.


On Fri, Oct 22, 2010 at 1:07 PM, Haas, Neal <nhaas at co.fresno.ca.us<mailto:nhaas at co.fresno.ca.us>> wrote:
We want to go to SIP instead of our PRI's, anyone have a RFQ that I can use to base our RFQ on? Or have pointers to put into requirements?

I know that we will require at least 300 talk paths but most likely 450 talk paths, we are running numbers to figure that out.

Thank you

Neal H


_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
https://puck.nether.net/mailman/listinfo/cisco-voip

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20101022/8f001267/attachment.html>