[cisco-voip] CUCIMOC / Polycom RMX 2000

[Ryan Ratliff]

> we are piloting CUCIMOC 8.0.3

This is the important part.  If this version is intended to replace CUVA to allow video from the PC and audio from the hard phone then you need to engage whoever you got the software from for support on it.

-Ryan

On Oct 25, 2010, at 3:17 PM, Scott Voll wrote:


to add to this.... if I use the Cisco Unified Services Framework Device the video works.  it's only when I use the physical phone where I run into this issue.

TIA

Scott

On Mon, Oct 25, 2010 at 12:08 PM, Scott Voll <svoll.voip at gmail.com> wrote:
So we have upgraded to CM 7.1.5bsu2.

we are piloting CUCIMOC 8.0.3

we have our Polycom RMX2000 setup as a H323 gateway.

Before the pilot we had VT advanage working with it without a problem.

Now with CUCIMOC we get NO video (audio is fine).  In the RMX is shows a connection fault.

Anyone have this working?  Did you have to do something special to get it working?

TIA

Scott

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20101026/06dea4db/attachment.html>