[cisco-voip] CUCIMOC / Polycom RMX 2000

[Scott Voll]

NOT EFT......... Piloting in a small group as to weather or not to purchase
it. $XX,XXX


Scott

On Tue, Oct 26, 2010 at 8:41 AM, Ryan Ratliff <rratliff at cisco.com> wrote:

>
> we are piloting CUCIMOC 8.0.3
>
>
> This is the important part.  If this version is intended to replace CUVA to
> allow video from the PC and audio from the hard phone then you need to
> engage whoever you got the software from for support on it.
>
> -Ryan
>
> On Oct 25, 2010, at 3:17 PM, Scott Voll wrote:
>
>
> to add to this.... if I use the Cisco Unified Services Framework Device the
> video works.  it's only when I use the physical phone where I run into this
> issue.
>
> TIA
>
> Scott
>
> On Mon, Oct 25, 2010 at 12:08 PM, Scott Voll <svoll.voip at gmail.com> wrote:
>
>> So we have upgraded to CM 7.1.5bsu2.
>>
>> we are piloting CUCIMOC 8.0.3
>>
>> we have our Polycom RMX2000 setup as a H323 gateway.
>>
>> Before the pilot we had VT advanage working with it without a problem.
>>
>> Now with CUCIMOC we get NO video (audio is fine).  In the RMX is shows a
>> connection fault.
>>
>> Anyone have this working?  Did you have to do something special to get it
>> working?
>>
>> TIA
>>
>> Scott
>>
>
> _______________________________________________
> cisco-voip mailing list
>
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20101026/37688318/attachment.html>