[cisco-voip] help with debuging calls during SRST

[Lelio Fulgenzi]

I'm not having any luck debugging calls during SRST mode. What I'm looking to find out is: 

    • which dial-peer is being hit 
    • all the digits that are being sent out to the PRI (including translations and prefixes) 
    • which PRI is being used 

I'm able to get which dial-peer is being hit and the translations, but I can't see the digits being sent to the PRI and which PRI is being used. I've got a crossover connected so both ports are up, but I don't think it's that, I think I'm just not using the right debug statements. 

For example, when I hit the dial-peer below. I'd like to see the "BAD#" digits being sent to pri 0/0/0. 



dial-peer voice 91811901 pots 
corlist outgoing uogdev-block-services-css 
huntstop 
preference 2 
destination-pattern 9[1-8]11 
clid network-number 5196741500 
port 0/0/0:23 
forward-digits 0 
prefix BAD# 



--- 
Lelio Fulgenzi, B.A. 
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1 
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN) 
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
Cooking with unix is easy. You just sed it and forget it. 
- LFJ (with apologies to Mr. Popeil) 


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20101028/09dff287/attachment.html>